Getting StartedWS_FTP ProSite Configuration SettingsWhether you save a site configuration or not, you can set a number of parameters that determine how you will connect to the site.Setting the Remote PortThe remote port is the port on which WS_FTP Pro will try to connect to the FTP site. This is normally 21; however, it may be something different if you are going through a firewall, or if the FTP site administrator has assigned the FTP protocol to another port.1 Do one of the following:•In the Classic interface, select Connect from the File menu to view the “Connection” dialog box. Then select the site, and click Advanced Properties.•In the Explorer interface, select a site, select Site Properties from the File menu.2 Click the Advanced tab.3 Enter the Remote Port number.Retrying the ConnectionIf the initial connection attempt fails, the FTP site may be busy. WS_FTP Pro can try again to make a connection.1 Do one of the following:•In the Classic interface, select Connect from the File menu to view the “Connection” dialog box. Then, select the site, and click Advanced Properties.•In the Explorer interface, select a site, select Site Properties from the File menu.2 Click the Advanced tab.3 In the Connection Retry box, enter the number of times to try again.
