User’s GuideWS_FTP ProTo turn on passive transfers for a site:1 Do one of the following:• In the Classic interface, from the “Connection” dialog box, select the site so that its host information is shown. • In the Explorer interface, select a site and then select SiteProperties from the File menu to view the Host Info tab.2 Turn on Passive Mode.In the Classic interface, you can also turn on passive transfers as the default setting for all sites:1 Select Options from the View menu.2 Click the Session tab.3 Turn on Use Passive Transfer Mode.4 (Optional) Click Set as Default. Note When you turn on this option and click Set as Default, the option is set as the default for all sites; that is, it becomes the setting for all site configurations unless it is overridden by the settings for particular sites and folders.Restarting Failed or Interrupted TransfersSome FTP servers allow clients to restart transfers that have failed or been interrupted due to a lost connection, cancellation, or other reason. (However, many Microsoft FTP servers do not.)When you reconnect, you are asked if you want to restart the transfer:
